The scale of relative acidity or alkalinity, expressed in logarithmic numbers from 0 - 14, with 7.0 being neutral. What's really being measured is the hydrogen ion concentration. Some would say pH stands for Power of Hydrogen or Percent of Hydrogen.
A common type of interior finish applied over the concrete shell of an in-ground swimming pool. We use marble dust.
Sometimes known as a toilet jack, a plumber's snake is a flexible auger used to remove clogs in plumbing that cannot be loosened with a plunger. Most of these devices consist of a coiled metal wire with space between the coils at the end. The other end is attached to a device with a crank that rotates the wire as it moves down into the pipe. Drains are cleared by one of several mechanisms: the auger end of the wire digs itself into the clog much like a corkscrew, allowing retrieval of the object causing the clog when the snake is pulled out. (Commonly hair, combs, small toys, cloth.) The end of the snake breaks up the object, allowing it to pass through the drain. (Commonly tree roots, foam insulation, plastic objects.) The snake flails around the inside surface of the pipe, scraping off accumulated matter (ranging from mineral deposits to bacon fat) which was reducing the effective interior diameter of the drain pipe. The auger should be turned clockwise only, unless it has become jammed in the drain. Not only is this essential for retrieval of foreign objects, but for the longevity of the cable.
The sliding disc assembly that changes valve position in a push-pull valve. For example, up for backwash, down for filtration.
An algaecide / algaestat made up of repeating polymer molecules. Used for green algae and available in varying strengths.
See non-chlorine shock.
Also see: NON-CHLORINE SHOCK
Parts per million. A method of assigning value to certain concentrations of chemicals in the water. For example, alkalinity should be kept at 80-120 parts per million, by weight and in relation to the water it's dissolved in.
To come out of solution; become insoluble by result of chemical action. Material forced out of solution, purposefully or accidentally, will then settle, stain or scale, or remain suspended in the water.
A test for the rate of water flow; also a test for leaks in plumbing by placing a line in question under pressure and waiting for the pressure to drop.
A device indicating pressure in a filter system. Provides a determination of how the system is operating, and informs us when service is required.
The return side of the plumbing. The section from the pump impeller towards the pool.
A switch used in pool heaters which opens when the flow rate is insufficient for safe heater operation. This disrupts the circuit in the heater, preventing it from firing.
A mechanical wet-end, powered by an electric motor, which causes hydraulic flow and pressure for the circulation of the pool water.
A device placed on the suction side of the pump, which contains a removable strainer basket designed to trap large debris in the water flow without causing restriction. Sometimes called a Pump Leaf Trap.
A two-position valve used for backwashing sand or DE filters.
Polyvinyl chloride, which is used to make flexible and rigid PVC pipe used for pool plumbing.